1. Razor sharpness: This edge is done for scissors with convex shape blade. A separate edge is  crafted at the end of this convex shaped blade.
2. Convex Edge: This does not have a visible separate edge. This is a new technique in scissors edges and has a long lasting sharp cutting effect. This helps for a effortless cutting and for long period of time.
3. Beveled Edge: This is a regular form of edge which was initially introduced. This has a slight creaking sound (two blades meet) as this is a nature of metal.  Never-the less this is still considered as a very successful type of blade. This edge has an ability to cut any form of hair and this edge is heavier/thicker than other edges. This is still used the users around the globe.

Blade shape:

1. Beveled blades: This is a straight plain/flat blade.
2. Convex blades: This blade is shaped and rounded from the outside of the scissors blade up to the edge.

1. Opposing handles:  The lengths of both the handle are the same and therefore called  opposing.
2. Simi-Off set handles: This is more-or less similar to the off-set handles. The only difference is that the length size of the handles is slightly less difference in length.
3. Off-set handles: The scissors with this type of handle has two different handle sizes. Where the middle finger fits  in the hole, this handle is slightly longer compared to the handle where  the thumb is inserted.

1. Fixed Fingers: These finger rests are in one form with the scissors and are shaped when the first stage scissors forging is done. These can not be removed or detached. These can only be removed by cutting them off. these forms of finger rest are also called fixed finger rest.
2. Detachable finger rest: These finger rest are screwed to the handle and can be removed by un-screwing according to need.

1. Fixed Screw: This type of screw cannot be adjusted after manufacturing; its use is negligible now.
2. Premium Screw: This type of screw will only be adjusted with the help of a screw driver.
3. Adjustable Set screw: This type of screw does not need a screw driver to adjust. This can be immediately adjusted according to need of the user. Scissors with adjustable screw are over-all more preferred, for this reason.

1. AISI-440 Stainless Steel. Rockwell hardness 58-60.
2. AISI-420 Japanese Stainless Steel. Rockwell hardness 55-58.
3. High Carbon Steel (Pakistan) Rockwell hardness 52-54.
4. TC scissors: Extra strip Welded on the cutting edge of Model VS -1263TC, can  be welded on any scissor the strip is made of tungsten carbide, & cobalt

The customer can order scissors to be manufactured in any of the three grades of steel mentioned above

• We can have any size or design of scissors colored according to customer demands.
• Scissors sizes can be manufactured according to customer requirements.
• The following methods are used for coloring i.e. titanium, pvc coating, sand/dull finish and polish/silver finish. As for titanium coating (PVD) we can have the following colors on scissors i.e. multi/rainbow,  blue, purple, gold, brown & black.
• If customer requires a certain accessories i.e. adjustable screw, premium screw, tension plate, etc. to have fitted in any scissors of there choice, this can be done accordingly. Further you are informed that in order to have these accessories/design or steel changed according to your desires, a minimum quantity of 100 pieces Per size/per design will be acceptable and time period required to manufacture these scissors with changes will be confirmed upon the quantity ordered. Also kindly be informed that when order has been confirmed and manufacturing started, no further changes will be acceptable during this period.
• Also note that there are ( no ordering restrictions for quantity of scissors available in stock.)